|
Device list
Features:
-
Programs high-density Flash
memory devices at near theoretical minimum programming times (Program+verify
INTEL28F320W18, 32Mb less than 13.5s )
-
Standard 48 pin universal
pin-drivers come with universal package adapters to support all type of
devices in same package with a single adapter. No adapters are needed
for DIL devices. Universal pin-drivers are expanded to 100 pins by
replacing the standard DIL48 module with PEP3000 module. Up to 100 pins
universal adapters are available working with PEP3000.Universal adapters
ensure rapid algorithm update. Device-specific adapters are also
available for devices above 48 pins that are amounted on DIL48 module.
Down to 1.5V low voltage devices are supported directly thanks to the
DAC controlled I/O levels.
-
Advanced hardware features
minimized Bounce noise. Only IC manufacturers approved algorithms are
adopted. High yield rates are guaranteed for all devices including low
voltage, critical and second-hand devices. ±5% and ±10% Vcc Verification
promises programming reliability.
-
Supports 15000+ devices from up
to 110 IC manufacturers including MEMORY、MCU、PLD.
-
Free life-time software update.
-
SUPERPRO/3000U is designed for
multi-applications. There are 3 working modes, PC-hosted mode via USB
port for R&D, Stand-alone mode for production, Terminal mode for
customer application. It comes with a full-featured OS, LCD+ keypad
operator interface and a CF card interface for algorithms and user data
files storage for stand-alone mode.
-
Pin continuity and wrong chip
insertion check prevent chips from accident damage.
-
Over-current and over-voltage
protection for programmer hardware.
-
Standard TTL/CMOS logic ICs and user-defined logic ICs can be tested and
recognized.
-
Software supports WINDOWS 98/ME/NT/2000/XP.
-
Operator friendly control
software combines many powerful functions with ease of use. Project
minimizes the whole process of device selection, file loading, device
configuration setting, operation option, batch file setting etc. to a
single step. History of device selection and file loading simplify
operation. Batch command combines device operations like program, verify,
security into a single command at any sequence. Auto-Start start Batch
command automatically as soon as the chip is detected to be inserted in
the socket properly. Serial number can be generated and programmed into
devices automatically in anyway customer specified. The correct device
type will be suggested according to the actual ID read when a mistake
type is selected. With help of the open API user can even change the
buffer content from chip to chip. Recognizes file formats and detects
large file offset automatically.
-
SUPERPRO/3000U announces
clustering programming system. a characteristic volume production
solution. Several units work together in stand-alone mode like a
multi-site production programmer. Advantages over traditional gang
programming:
-
No special gang adapter and s/w
are needed. Supports more devices and algorithms update more quickly.
-
Meets budget flexibly. Starts
with a single unit, then, add more to increase throughput with
business growing.
-
Safer for the production
chain because a single unit faulty will not stop whole production.
-
Higher throughput. Each unit
starts working as soon as a new chip is inserted, No need for
synchronous start of all the units.
-
Speed Comparison
|
Type |
Program (sec) |
Verify (sec) |
Program +Verify (sec) |
Memory Size (ea) |
|
28F320W18 |
9 |
4.5 |
13.5 |
32Mb FLASH |
|
28F640W30 |
18 |
9 |
27 |
64Mb FLASH |
|
AM29DL640E |
38.3 |
10.6 |
48.9 |
64Mb FLASH |
|
MB84VD21182DA |
9.6 |
2.9 |
12.5 |
16Mb FLASH |
|
MB84VD23280FA |
38.3 |
10.6 |
48.9 |
64Mb FLASH |
|
LRS1381 |
13.3 |
4.6 |
19.9 |
32Mb FLASH |
|
M36W432TG |
11.8 |
4.6 |
16.4 |
32Mb FLASH |
|
MBM29DL323TE |
17.5 |
5.5 |
23.3 |
32Mb FLASH |
|
AT89C55WD |
2.1 |
1 |
3.1 |
20KB MCU |
|
P89C51RD2B |
4.6 |
0.9 |
5.5 |
64KB MCU |
Specifications:
-
Device Support:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory（NOR and NAND）, BPROM, NVRAM, SPLD, CPLD, EPLD,
Firmware HUB,Microcontroller, MCU, Standard Logic.
-
Package Support:
DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP,TSOP, TSOPII, SOP,
PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP etc.
-
PC Interface: USB
-
Local Storage Media:
Compact FLASH Card
-
Standard Package: Main
unit, DIL48 Module, AC adapter, CD-ROM, User’s Guide, USB Cable
-
Option Accessories: PEP3000 Pin-driver Expansion Pack, Package Adapter, CF Card
|
